Adhesives

Mix ratio of 1:1 by weight & volume Fast clamp time, high strength structural adhesive Sag resistance of 14mm at 20 degrees celcius Gels in 10 minutes, Solid in 2 hou...

Mix ratio of 1:1 by volume and weight Can be used alongside other Spabond products as a ‘Spot Weld’ 5 minute adhesive Available in cartridges Tacking and sec...

Replacing SP335 New mix ratio 3:1 by volume Sag resistance of up to 10mm Ideal for thin lines, core bonding, large surface areas & detailed work Available in two har...

Replacing SP340 New mix ratio 3:1 by volume Sag resistance of up to 20mm Optimised for rapid dispense from cartridges or automated mixing machines Available in two harde...

Replacing SP345 New mix ratio 3:1 by volume Sag resistance of up to 30mm Ideal for large gap filling & filleting applications as well as high performance project...

Very good non-sag behaviour Short curing time High strength and modulus for structural bonding applications Low smell Does not contain solvents or PVC   &nb...

GL approved Good ambient temperature cure (see BP10 for lower temperatures) Suitable for composite to composite and composite to metal bonding Fast curing

Suitable for bonding at lower temperatures down to 5°C (Max. 20°C) Same mechanical performance as BP20 Low temp. curing extends the repair season

High fatigue and impact resistance Long open time at high temperature and humidity. Cures at room temperature Accelerated curing and higher mechanical strength with heat....

Solvent free epoxy based bonding paste Wide range of applications Suitable for bonding laminates, woods, metallic and mineral components Excellent sag resistance Suitabl...

Two component toughened methacrylate adhesive Cures at room temperature Suitable for general purpose and rapid assembly Application on a range of susbstances

Two component fast curing methacrylate adhesive Designed to accelerate structural bonding Provides high toughness and resilience