Resin Systems

DNV-GL & Lloyds registered 100:26 Resin to Hardner mix ratio by weight Works with the full range of Ampreg 3X hardener speeds Viscosity optimised for good fabric wet-...

100:29 Resin to Hardener mix ratio by weight Improved health and safety Tough resin matrix giving good laminate mechanical properties Optimised for hand lay up and vacuum...

Good impregnation and non-draining properties High glass transition temperature Fast curing High stiffness and strength Direct curing without waiting gel-time Usable f...

GL Approved Reduced wastage and mess Uses the LR635 resin system Handy pack sizes

Suitable for the Epikote LR635 Epoxy resin system Different sizes available

Suitable for temperatures down to 5°C (max. 20°C) Comes in handy foil bags Suitable for hand layup Extends repair season  

Cartridge dispensed epoxy infusion system Easy mixing Less waste/mess Designed to work with the infusion kit from DD compound

Suitable for the Epikote LR636 Epoxy resin system Different sizes available  

Hardener for Epikote Resin MGSLR635  

Epoxy based laminating resin system Contains neither solvents or fillers Used to process glass, carbon and aramid fibres

Hardener for Epikote Resin MGS LR285 Hobbock  

Low viscous resin system Can be used for processing glass, aramid fibres and carbon